.pdf File

CD Start Page

DATA ACQUISITION ONLINE Page

DATA ACQUISITION PRODUCTS Page

LCIC-1106A $849
Load Cell Interface Card for IBM or Compatibles

• Compatible with all load cells and other strain gage based transducers

• Replaces all conventional weighing indicators. Card resides directly on computer bus, thus eliminating slower RS232 and other communication ports

• Suitable for all dynamic, force measuring and real time applications

• Ultra fast A/D conversions (400 per second after filtering)

• Optional I/O card (8 outputs and 4 inputs all opto-isolated)

• Up to 16 cards may be installed in one PC

• User friendly easy calibration from the PC keyboard

• Very useful software package containing a weighing indicator, counting scale and check-weigher as well as examples of how to access the hardware

Direct communication with the PC's bus and high frequency sampling enable the LCIC-1106A to handle real time applications impossible with external indicators via serial communication.

The stand-alone microcomputer based interface card, requires no other interfacing accessories, simply connect the load cell directly to the card and you are ready to take readings.

TYPICAL APPLICATIONS:
Ñ Gravimetric Filling Systems Ñ Batching Controllers Ñ Loss-In-Weight and continuous weighing controllers Ñ Hi speed check weighers Ñ Multi scale processing-by using more than one LCIC Ñ Weighing in motion (like trucks on the roads) Ñ Multi head filling machines Ñ Measuring and analyzing forces in press machines

MAIN FEATURES:>/b>
Ñ User friendly calibration procedure with automatic zero and gain adjustment. Ñ Calibration parameters reside in the LCIC's memory, retained even if the card is moved from one PC to another. Ñ Calibration library. Up to four calibrations may be stored simultaneously on the board, and an unlimited number of calibrations may be stored on disk for later use. Ñ No auxiliary power supply required. The LCIC powers and senses 6-wire load cells. Ñ Provides data in weighing units (kg, gr., lb., ton) in ASCII or floating point-usable by almost any programming language. Ñ Opto-isolated I/O lines enable logic control through user's application program.

SOFTWARE INCLUDED:
Ñ Mapping memory diagnostics-for easy address selection to install the card. Ñ User-friendly calibration software. Ñ I/O check and test procedure built into the calibration software. Ñ Software to utilize PC as a weighing indicator, counting scale and check-weigher. Ñ Examples in source code how to access the card.

OPTIONAL I/O MODULE: ("Piggyback" to the LCIC)
Ñ Opto-isolated I/O lines enables logic control through user's application program Ñ 4 inputs-sink or source connection. Max. transistor current at 30 Vdc 12mA Ñ 8 outputs-current sink connection 5-30 Vdc max, 80 mA Ñ I/O connector: D type 25 pin male

COPY [To Your Hard Drive] LCIC Software Now!

VIEW an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).

U.S.A. and Canada International Callers; Sales & Service; 203.359.1660

Please E-Mail any comments or suggestions to OMEGA®. ® COPYRIGHT 1999 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED